How EV Collision Repair Changes the Way You Paint and Cure

How EV Collision Repair Changes the Way You Paint and Cure

How EV Collision Repair Changes the Way You Paint and Cure

Electric vehicles are no longer a novelty in the collision bay, and the way a shop refinishes them is not quite the same as a gas vehicle. The paint itself is familiar, but the car underneath it is not: a large battery pack sits in the floor, and that pack does not like heat. For shops planning ahead, understanding how EVs change cure strategy, booth workflow, and training is becoming a competitive advantage. Legacy Coatings works with refinish professionals across Alberta and Manitoba who are navigating exactly this shift, so here is what is actually different.

The Battery Changes Your Heat Budget

Traditional bake cycles push panel and booth temperatures high to cure clearcoat quickly. The problem is that lithium battery packs are sensitive to sustained heat, and manufacturers publish temperature limits for how hot a vehicle can get and for how long during repair. Exceed them and you risk degrading the pack or voiding repair compliance.

This does not mean you cannot bake an EV. It means you have to respect the published limits, which often point toward lower-temperature, longer cure strategies or spot curing that keeps heat off the battery zone.

Practical heat-management habits

  • Check the manufacturer's repair procedure for maximum temperature and duration before you bake.
  • Favour products and reducers that cure well at lower temperatures when a full high-temp bake is off the table.
  • Use localized or infrared curing where appropriate to keep heat away from the pack.

Low-Temperature and Energy-Smart Cure

The industry response has been a steady move toward clears and activators formulated to cure at lower temperatures and primers that air-dry or flash faster. For a shop, that means the product line you choose matters more than ever, because not every clear is happy curing cool. Matching the correct low-temperature-capable products to EV work is a conversation worth having with the automotive paint supplier team at Legacy Coatings before the first EV lands on the hoist.

Lower-temperature cure also trims energy use on every job, EV or not, which is a reason many shops are standardizing on these systems across the board.

Workflow and Safety Shift Too

EV refinishing is as much about process as product. Many procedures call for the vehicle to be in a specific state before heat is applied, and some require trained personnel for any work near high-voltage systems. That raises the bar on technician competence.

This is where structured upskilling pays off. Shops that invest in technical and safety training are better positioned to take EV work confidently rather than turning it away, and to document that they followed the correct procedure.

Booth scheduling changes as well. A lower-temperature cure can mean a different dwell time than your team is used to, so stacking EV jobs back-to-back with gas vehicles on the same bake cycle no longer works cleanly. Planning the booth around the slower, cooler cure keeps throughput predictable instead of surprising your schedule mid-shift. Many shops find that once they commit to a low-temperature system, the same approach smooths the entire booth workflow rather than complicating it.

Getting Your Shop EV-Ready Without Guesswork

You do not need to reinvent your whole operation. The practical starting point is auditing your clear and activator range for low-temperature capability, confirming your curing options, and making sure at least part of the team is trained on EV-specific procedures. Sourcing the right refinish products and the matching data sheets through one supplier keeps the transition orderly. Legacy Coatings supports collision shops across Western Canada as more EVs enter the repair stream.

Frequently Asked Questions

Can I bake an EV in a standard spray booth? Usually yes, but only within the vehicle manufacturer's published temperature and time limits for the battery. Check the repair procedure first, and plan for lower-temperature or localized curing if a full high-temp bake would exceed those limits.

Why are batteries so sensitive to booth heat? Lithium battery packs degrade when held at high temperatures, and sustained booth heat can reach into that range. Manufacturers therefore specify how hot the vehicle may get and for how long during refinishing.

Do I need special paint for EVs? Not special paint, but low-temperature-capable clears, activators, and primers make EV work far easier because they cure well without a high-temp bake. Matching your product line to lower cure temperatures is the key.

Is EV refinishing training really necessary? For work near high-voltage systems and for following manufacturer procedures, trained personnel matter for both safety and compliance. Structured training lets a shop take EV work with confidence instead of avoiding it.

How do I start getting my shop ready? Audit your clears and activators for low-temperature cure, confirm your curing equipment options, and train at least part of your team on EV procedures. A knowledgeable supplier like Legacy Coatings can help align your products to EV requirements.