BIS FMCS vs CRS: Key Differences, Eligibility, Process and Certification Requirements in India
Understand the key differences between BIS FMCS and CRS certification in India, including product coverage, eligibility, application processes, testing, documents and requirements for manufacturers and importers.
Businesses planning to sell products in India often come across different BIS certification requirements. Two terms that frequently create confusion are FMCS (Foreign Manufacturers Certification Scheme) and CRS (Compulsory Registration Scheme). Both are operated by the Bureau of Indian Standards (BIS), but they apply to different product categories and follow different approval procedures.
Choosing the correct scheme is important for manufacturers, importers and overseas brands. Applying under the wrong route can lead to unnecessary testing, additional expenses and delays in launching a product in India.
This guide explains the difference between BIS FMCS and CRS, who needs them, how the application process works and what businesses should check before starting.
What Is BIS FMCS Certification?
The Foreign Manufacturers Certification Scheme (FMCS) is a BIS certification route for manufacturers whose production facilities are located outside India. It allows eligible foreign manufacturers to obtain a BIS licence to use the Standard Mark on products that conform to the relevant Indian Standard.
FMCS has been in operation since 2000. It generally covers products other than the electronic and IT goods notified under CRS. Examples of product categories that may fall under FMCS include steel products, cement, electrical products, chemicals, footwear and certain consumer goods. The exact requirement depends on the applicable Indian Standard and government notification.
Bureau of Indian Standards
A foreign manufacturer must apply for the licence for its manufacturing premises. An Indian importer cannot simply obtain an FMCS licence in its own name in place of the manufacturer. The overseas applicant must also nominate an Authorized Indian Representative (AIR) as required by BIS.
What Is BIS CRS Certification?
The Compulsory Registration Scheme (CRS) is another BIS conformity assessment scheme, operated under Scheme II of Schedule II of the BIS (Conformity Assessment) Regulations, 2018.
CRS mainly covers notified electronic and IT products. Examples include mobile phones, laptops, power banks, LED products and other electronic goods listed under the applicable compulsory registration orders.
Under this scheme, the manufacturer must ensure that the product conforms to the relevant Indian Standard. Product samples are tested by a BIS-recognised laboratory, and the manufacturer submits the required application and test report to BIS. Once registration is granted, the product must carry the applicable Standard Mark and unique registration number.
CRS BIS
CRS can apply to both Indian and foreign manufacturers, provided their products are covered by the relevant notification.
BIS FMCS vs CRS: Main Differences
Although both schemes come under BIS, their purpose, product coverage and certification procedures are different.
|
Comparison point |
BIS FMCS |
BIS CRS |
|
Full form |
Foreign Manufacturers Certification Scheme |
Compulsory Registration Scheme |
|
Main purpose |
Certification of eligible products made by foreign manufacturers |
Registration of notified products |
|
Product coverage |
Generally products outside the notified CRS electronics and IT categories |
Notified electronic and IT products and other categories specifically brought under CRS |
|
Eligible applicant |
Foreign manufacturer |
Indian or foreign manufacturer |
|
Manufacturing location |
Outside India |
India or outside India |
|
Indian representative |
AIR nomination is required |
Requirements for foreign applicants must be checked under current CRS guidelines |
|
Testing |
Product testing as required under the applicable FMCS process |
Testing at a BIS-recognised laboratory |
|
Factory assessment |
Factory inspection forms part of the process |
Generally does not follow the same factory-inspection process as FMCS |
|
Approval |
BIS licence to use the Standard Mark |
BIS registration with a unique R-number |
|
Regulatory basis |
Scheme I certification route |
Scheme II registration route |
The table gives a general comparison. Specific requirements can vary according to the product, standard and current government notification.
Bureau of Indian Standards
Which Products Require FMCS or CRS?
The correct scheme is determined by the product category and the applicable government order, not simply by whether a product is manufactured in India or abroad.
Products commonly associated with FMCS include:
-
Cement and certain cement-based products.
-
Steel and steel products.
-
Selected electrical equipment.
-
Chemicals and petrochemical products.
-
Certain footwear and consumer products.
-
Other products covered by applicable BIS certification requirements.
Products commonly associated with CRS include:
-
Mobile phones and smartphones.
-
Laptops and tablets.
-
Power banks.
-
LED lamps and related notified products.
-
Certain power adapters and electronic equipment.
-
Other electronic and IT products included in the CRS list.
These are examples, not a complete list. Businesses should check the latest BIS product lists and applicable Quality Control Orders before deciding which scheme applies.
Application Process for BIS FMCS
FMCS generally involves a more detailed certification process because BIS assesses the foreign manufacturing facility as well as the product.
-
Check product applicability: Identify the relevant Indian Standard and confirm that the product is eligible for FMCS.
-
Prepare the application: Gather company details, factory information, product specifications and the required supporting documents.
-
Nominate an AIR: The foreign manufacturer must appoint an eligible Indian resident as its Authorized Indian Representative.
-
Submit the application: Apply through the BIS Manak Online portal and provide the prescribed documents and fees.
-
Factory inspection and testing: BIS carries out the applicable factory assessment. Samples are tested against the relevant Indian Standard.
-
Complete BIS requirements: Address any observations, submit required undertakings and complete the applicable licence formalities.
-
Receive the licence: Once approved, the manufacturer can use the BIS Standard Mark within the scope and conditions of the licence.
BIS provides specific application guidance and document checklists for FMCS applicants.
Bureau of Indian Standards+1
Application Process for BIS CRS
CRS follows a registration-based process for products covered by the applicable compulsory registration order.
-
Identify the product category: Check the CRS list and confirm the relevant Indian Standard.
-
Arrange product testing: Submit representative product samples to a BIS-recognised laboratory authorised for the relevant standard.
-
Collect the test report: Review the report and ensure the model and product details match the intended application.
-
Prepare supporting documents: Arrange manufacturer details, factory information, brand and model details, product photographs and other prescribed documents.
-
Submit the CRS application: Apply through the official CRS portal with the required information and fees.
-
Respond to queries: Provide clarification or additional documents if BIS raises any observations.
-
Obtain registration: After approval, use the applicable Standard Mark and unique R-number according to BIS marking requirements.
The registration is granted to the manufacturer for the approved product details. It is not a general approval that automatically covers every product made by the company.
CRSBIS
Documents Commonly Required
The exact checklist depends on the scheme and product, but applicants may need:
-
Company registration and manufacturing unit details.
-
Factory address and contact information.
-
Product specifications and technical details.
-
Product photographs and label artwork.
-
Relevant test reports.
-
Brand or trademark authorisation, where applicable.
-
Authorisation and nomination documents for the AIR, where required.
-
Declarations, undertakings and application forms prescribed by BIS.
Applicants should make sure that the company name, factory address, brand, model numbers and product information are consistent across all submitted records.
Common Mistakes to Avoid
One frequent mistake is choosing a scheme based only on the product's country of origin. A foreign-made electronic product may require BIS CRS Certification rather than FMCS if it falls under the notified CRS category.
Another mistake is relying on a product's commercial name without checking its technical classification. Two products that appear similar may be covered by different Indian Standards.
Businesses should also avoid submitting incomplete documents or test reports that do not match the models included in the application. Before beginning, review the current BIS requirements or seek guidance from a compliance professional such as umspcs to understand the correct route and prepare the application properly.
Conclusion
BIS FMCS and CRS serve different purposes within India's product compliance framework. FMCS is generally the certification route for eligible products manufactured outside India, excluding electronic and IT goods covered through CRS. CRS is a registration scheme for products specifically included in the applicable compulsory registration orders.
The right choice depends on the product category, manufacturing location, relevant Indian Standard and current government notification. Checking these details before arranging testing or filing an application can save time, reduce avoidable costs and help businesses meet Indian regulatory requirements.
Frequently Asked Questions (FAQs)
1. What is the main difference between BIS FMCS and CRS?
FMCS is a BIS licensing scheme for eligible foreign manufacturers, while CRS is a registration scheme for products covered by compulsory registration orders, mainly in the electronics and IT sector.
2. Can a foreign manufacturer apply for CRS?
Yes. Foreign manufacturers can apply for CRS when their products fall under the applicable CRS notification and they meet the relevant application requirements.
3. Is factory inspection required under both schemes?
FMCS includes factory assessment as part of its certification process. CRS generally follows a registration and product-testing route rather than the same factory-inspection process.
4. Can an Indian importer apply for FMCS certification?
The FMCS application must be made by the foreign manufacturer. The importer may coordinate with the manufacturer but cannot replace it as the applicant.
5. Is BIS certification mandatory for every imported product?
No. Mandatory certification or registration applies when a product is covered by the relevant government order or notification. The applicable requirement should be checked before importing or selling the product.
6. How can a business identify the correct BIS scheme?
Check the product's technical details, manufacturing location, relevant Indian Standard and the latest BIS product lists and government notifications. If the classification is unclear, obtain product-specific compliance advice before proceeding.


