LG Washer Error Codes Explained: Quick Fixes You Can Try at Home

Modern washing machines speed up and simplify laundry, but they may also be annoying when an error number appears on the screen out of the blue. You may have come across codes like OE, UE, LE, or dE, which are cryptic combinations of letters and digits, if you own an LG washer.

Fortunately, these error codes are not as difficult as they may appear. They are merely your washer's method of alerting you to the issue. Without having to wait for a service or spend a lot of money, the issue can frequently be resolved at home. The most frequent LG washer problem codes will be covered in this article, along with easy, step-by-step solutions that anyone may attempt.

Why LG Washer Error Codes Appear

Diagnostic systems are included into the design of LG washing machines. The machine will automatically pause and display a specific error code when anything isn't functioning properly, such as a drainage issue, an imbalanced load, or a difficulty with the water flow.

This method is designed to prevent additional harm to your appliance and to facilitate troubleshooting. Time, effort, and even repair expenses can be reduced by learning to decipher these codes.

1. OE Error Code – Drainage Problem

Meaning of It:

 The OE code typically indicates that the water in your washer cannot be adequately drained out. This is among the most frequent problems that users encounter.

Potential Reasons

A blockage in the drain hos

A clogged drain pump filt

Drain hose that is kinked or twisted

clogged home drainage system or standpip

Quick Fix: For safety, stop the cycle and unplug the washer.

Examine the drain hose located behind the device. Verify that it isn't crushed or kinked.

To check for obstructions, disconnect the hose and flow water through it.

Open the drain pump filter, which is often found at the washer's front bottom. Clear away any small objects, coins, or lint.

To determine whether the mistake occurred, reattach everything, plug the washer back in, and perform a quick spin cycle.

2. UE Error Code – Unbalanced Load

Meaning of It:

 The washer has detected an unbalanced load, typically during the spin cycle, as indicated by the UE code.

Potential Reasons:

Too many or too few garments

Things that are heavy on one side of the drum

Laundry that is not equally distributed

Quick Fix: To balance the weight, pause the cycle and reorganize the clothing inside the drum.

To assist balance the drum, add a few smaller objects if you just have one large item, such as a blanket or towel.

Start the spin cycle again.

Verify that the washer is level on the floor if the error keeps coming up. If required, adjust the leveling legs.

Pro Tip: Don't put too much or too little strain on the machine. Your washer will operate better and last longer with a load that is balanced.

3. LE Error Code – Motor Lock Issue

Meaning of It:

 "Locked Motor Error" is what the LE code represents. This occurs when there is a problem with the drum rotating or when the motor is overloaded.

Potential Reasons:

A drum that is overloaded

Clothing tangles that stop the drum from moving

A mechanical problem involving the rotor or motor

Simple Solution: Unplug the washer and let it a good fifteen minutes to rest. Resetting the system is sometimes all that is necessary.

If the drum is overloaded, take off some clothing.

Examine the drum for any obstructions that might be causing it to jam.

Restart the cycle by plugging the washer back in.

After following these instructions, if the issue still occurs, professional assistance may be necessary; however, in many cases, the computer can be fixed by just lowering the load and restarting it.

4. dE Error Code – Door Error

The dE code indicates that the door is not securely secured or closed. If your washer detects that the door isn't tight, it won't start.

Potential Reasons

The door is not completely closed.

Blockage in the gasket of the door

A broken door latch

Easy Fix: Open the door and take off any garments that might have gotten stuck between the door and the gasket.

Firmly shut the door until a click sounds.

To reset the control board, unplug the washer for ten seconds and then plug it back in if the code reappears

It could be necessary to repair the latch if it is damaged or misaligned.

Pro Tip: Always look for tiny anything that could interfere with the door's ability to seal, such as socks or strings.

5. FE Error Code – Overflow Issue

What It Means: When the washer detects an excessive amount of water within the drum, the FE code is shown.

Potential Reasons:

A malfunctioning water intake valve

The water supply is not turning off.

malfunctioning control board

Quick Fix: Immediately cut off the water supply.

Unplug the washing machine.

The inlet valve can be jammed and need to be replaced if water keeps flowing.

If you need to manually drain extra water, restart the washer.

Pro Tip: Overflow problems can be avoided with routine repair of inflow hoses and valves.

6. PE Error Code – Water Level Sensor Issue

What It Means: A malfunction with the pressure switch or water level sensor is indicated by the PE code.

Potential Reasons:

A malfunctioning pressure sensor

The air hose is clogged.

Problems with the wiring or connection

Easy Fix: Unplug the washing machine.

Check for obstructions or kinks in the air hose that is attached to the water level sensor

Make sure the connection is snug and clear any debris.

Reinstall the washer and test it with a little load.

7. CL Code – Child Lock Activated (Not an Error)

What It Means: There isn't a real error in the CL code. It indicates the activation of Child Lock mode, which turns off the control panel to stop unintentional adjustments.

Fast Fix:

For three to five seconds, press and hold the Child Lock button (or the two selected buttons).

After the "CL" indicator goes away, the controls will be operational once more.

Pro Tip: you prevent confusion later, use this function as necessary, but be sure you know how to deactivate it.

8. tE Error Code – Temperature Sensor Issue

1. What It Means: A malfunction in the thermistor or temperature sensor is indicated by the tE code.

2. Potential Reasons:

3. A malfunctioning senso

4. A loose link in the wiring

5. malfunctioning control board

6. Quick Fix: To reset the washer, unplug it for a short while.

7. Verify that the connections for the hot and cold water supplies are functioning correctly if the issue continues.

8. A technician may need to repair the sensor if the issue persists.

Resetting Your LG Washer

Sometimes, even after the problem has been resolved, an error code still shows up. Resetting the washer can be beneficial in those situations:

Unplug the washing machine from the electrical outlet.

For five seconds, press and hold the Start/Pause button.

Re-plug it and perform a test cycle.

This easy reset frequently gets rid of obstinate error codes and small program bugs.

Preventing Future Error Codes

• With routine upkeep and care, error codes are frequently preventable. The following simple routines have a significant impact:

• Every month, clean the drain pump filter.

• Don't put too much or too little pressure on the drum

• To avoid residue accumulation, run tub cleaning cycles on a regular b

• Only use the recommended amounts of HE (High Efficiency) deterg

• Periodically inspect connections and hoses for kinks or le

• Verify that the machine is level with the ground.

When to Call a Professional

The majority of LG washer error codes may be resolved at home, however some problems could call for professional assistance. It's best to get in touch with a qualified appliance specialist if you've tried all the quick fixes and the problem still exists, or if there's an electrical problem, weird noise, or burning smell.

Sometimes your washer can be put back in perfect operating order by simply replacing a small component, such as an inlet valve or sensor.

Final Thoughts

It need not be an unpleasant experience to see an error message on your LG washer. These codes serve as built-in guidance to assist you in rapidly identifying and resolving issues. Most problems may be fixed with a few easy actions, from imbalanced loads to clogged drain hoses.

You may save time, save needless service calls, and maintain the smooth operation of your washer for many years to come by knowing what each code signifies and implementing the simple solutions described in this article.

In the realm of home appliance repair, a little knowledge really can go a long way!